Grandstream GXV3175 User Manual Bedienungsanleitung PDF herunterladen (Seite 55)

FIRMWARE VERSION 1.0.3.76 GXV3175 USER MANUAL Page 55 of 139

Connection Request

Password

Enter connection request password

Connection Request Auth

Mode

Select the authentication method among “No authentication”, “Basic”, or

“Digest”.

Connection Request Port

Enter the connection request port

Maintenance/OpenVPN Settings

OpenVPN Enable

This enables/disables OpenVPN functionality. The default setting is No. To

use OpenVPN functionality, it requires user to have access to an OpenVPN

server.

OpenVPN Server Address

The URL/IP address for the OpenVPN server.

OpenVPN Server Port

The network port for the OpenVPN server. By default, it is set to 1194.

OpenVPN CA

OpenVPN CA file (ca.crt) required by the OpenVPN server for

authentication purposes. Press “Upload” to upload the corresponding file

to the phone.

OpenVPN Client

Certificate

OpenVPN Client certificate file (*.crt) required by the OpenVPN server for

authentication purposes. Press “Upload” to upload the corresponding file

to the phone.

OpenVPN Client Key

The OpenVPN Client key (*.key) required by the OpenVPN server for

authentication purposes. Press “Upload” to upload the corresponding file

to the phone.

NoTE: To use OpenVPN functionalities, users must enable OpenVPN and configure all of the settings

related to OpenVPN, including server address, port, OpenVPN CA, certificate and key. Additionally, the

user must also set the SIP account to use “VPN” for the “Nat Traversal” (under Account  Network

Settings). Reboot the phone after these settings are saved for the changes to take effect. Once the phone

connects to the OpenVPN server and the authentication is correct, the phone will show the VPN IP

address under the Status  Network Status, but it will still display the LAN IP on the LCD of the phone.

Maintenance/Device Manager (LCD)

Screen Saver Timeout

(m)

This sets the lapsed idle time needed for the screen saver to appear. The

default setting is 5 minutes.

Screen Saver Interval

(s)xd

The screen saver is a picture slide show. This defines the frequency to

change the picture on the screen for the screen saver.

The default setting is 10 seconds.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 138 139

Kommentare zu diesen Handbüchern

Keine Kommentare

Grandstream GXV3175 User Manual Bedienungsanleitung Seite 55

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kommunikation Grandstream GXV3175 User Manual