Grandstream GXW400x User Manual Bedienungsanleitung PDF herunterladen (Seite 29)

FIRMWARE VERSION 1.0.14.1 GXW400X USER MANUAL Page 27 of 60

CONFIGURATION GUIDE

CONFIGURING GXW400X VIA VOICE PROMPT

DHCP MODE

Select voice menu option 01 to enable GXW400X to use DHCP.

STATIC IP MODE

Select voice menu option 01 to enable GXW400X to use STATIC IP mode, then use option 02, 03, 04, 05

to set up IP address, Subnet Mask, Gateway and DNS server respectively.

FIRMWARE SERVER IP ADDRESS

Select voice menu option 13 to configure the IP address of the firmware server.

CONFIGURATION SERVER IP ADDRESS

Select voice menu option 14 to configure the IP address of the configuration server.

UPGRADE PROTOCOL

Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose

between TFTP and HTTP.

FIRMWARE UPGRADE MODE

Select voice menu option 17 to choose firmware upgrade mode among the following three options:

1) always check, 2) check when pre/suffix changes, and 3) never upgrade

WAN PORT WEB ACCESS

Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.

CONFIGURING GXW400X WITH WEB BROWSER

The GXW400X series gateway has an embedded Web server that allows users to configure the

GXW400X through a web browser.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 61 62

Keine Kommentare

Grandstream GXW400x User Manual Bedienungsanleitung Seite 29